10 Aesculap Blade set with DLC coating Favorita The Aesculap „Diamond-like Carbon“ (DLC) coating perfectly combines the property profiles of diamond- and PTFE-based surface enhancement. This special coating guarantees outstanding product properties: • high wear protection and longer service life • excellent gliding thanks to minimised frictional resistance • extended edge retention • increased corrosion protection • reduced care requirement thanks to dirt-repellent surface The advantages of the Favorita system naturally also apply to these blade sets with DLC coating. Ref. no. Cutting length Cutting width € GH700D 0.05 mm 40 mm 1/10/100 GH703D 0.1 mm 40 mm 1/10/100 GT754D 3 mm 40 mm 1/10/100 GT758D 5 mm 40 mm 1/10/100 GT770D 7 mm 40 mm 1/10/100 GT779D 9 mm 40 mm 1/10/100 Favorita system Care steps for Favorita Blade Sets The tooth spaces must also be given a thorough cleaning. When using a disinfectant, the blade set should be dried thoroughly to prevent corrosion. The blade must be oiled after cleaning. You should oil every 5-10 minutes during operation. This is done by adding 3 drops of the special clipper oil on the teeth and 2 drops between the teeth. After oiling, let the machine run for a few minutes so that the oil can distribute itself well and thus not be transferred to the hair of the animal. With proper maintenance and care, you can increase the durability of the clipping heads by up to 20 %. This can also delay when re-sharpening is required. The shearing blades must be oiled with the blade set attached before each use! An oil spray with a small tube attachment is also well suited for oiling between the shearing blades. This creates more pressure and the oil is better distributed between the shearing blades. Disassembly Oiling Drying Cleaning Made in Germany GT754D GT758D GT770D GT779D GH700D GH703D
RkJQdWJsaXNoZXIy MTUxMjAyMw==