11 SnapOn system The SnapOn system from Aesculap features: • Compatible clipper head system • Clipper head GT330 included • Cord-connected machines with proprietary motors • Cordless machines with lithium-ion batteries Changing the blade set Removing the blade set: • loosen the blade set lock by pressing the push button • press against the blade set from the front to tip it backwards • pull the blade set out of the blade hinge Attaching the blade set: • place the blade set on the blade hinge • switch on the machine • press the blade set forwards until it clicks Important: the machine must be turned on so that the rocker arm can snap into the blade set. If it does not snap in, you will hear a “rattling“ sound and the blade set will not cut. Tip: If the blade hinge for the blade set is accidentally tipped, you can loosen it again using a screwdriver. Cleaning and caring for the blade set: GT604 Aesculap Oil GTA103 Aesculap Blade Cool 2.0 We recommend oiling the blade set before each shearing session. You can both reduce heat build-up and clean at the same time with the Blade Cool. Use this at least every 10 minutes. Oiling during shearing also improves the cut and extends the sharpness of the blade set.
RkJQdWJsaXNoZXIy MTUxMjAyMw==