296 Stable and yard essentials Gutter heating cable Frost Protection Heating Cable for Gutters and Pipes The plug-in heating cable, suitable for gutters and pipes, meets the requirements of strength class M2 as per IEC60800:2009 to keep gutters and pipes safely above freezing. The high heating power of 20 watts per metre means the heating cable keeps gutters, downspouts and piping frost-free even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 °C and off again at +12 °C. • suitable for gutters: Strength class M2 • ready-to-plug heating cable for easy installation • integrated thermostat for energy-saving use • suitable for metal water pipes • incl. safety plug for high level of safety • Connector cable length: 2 m • High protection: IPX7 • Protection class: I Ref. no. Heating output Length Ø Plug type € 296087 100 W 5 m 6 mm Safety Plug E + F 1/10 100 296088 200 W 10 m 6 mm Safety Plug E + F 1/10 100 296089 300 W 15 m 6 mm Safety Plug E + F 1/10 100 296090 400 W 20 m 6 mm Safety Plug E + F 1/10 100 296091 500 W 25 m 6 mm Safety Plug E + F 1/10 80 296092 800 W 40 m 6 mm Safety Plug E + F 1/10 80 296093 1.000 W 50 m 6 mm Safety Plug E + F 1/10 80 Ref. no. Description MOQ Pieces / unit € 296097 Spacer for Heating Cable incl. cable tie 1 pack 5 / pack 1/250 296098 Kink protection for heating cables incl. cable tie 1/100 296099 Personal safety switch 1 Safety Plug integrated thermostat for energy-saving use Note: • Please note that each heating cable connection must be fused via a separate residual current circuit breaker (E.g. item no. 296099, plug-in PRCD switch). • The heating cable must be protected against sharp edges, e.g. where the guttering meets the downpipe, using edge protection (item no. 296098). • The heating cable must not overlap, cross over or be in contact with itself or another heating cable at any point. To permanently prevent contact, we recommend the use of suitable spacers if necessary (item no. 296097). • For safety reasons, pipes and metal guttering, protective tubes and sheathing must be earthed before installation. 296097 296097 296098 1 m 296097 296098 296098 296099 1 2 3
RkJQdWJsaXNoZXIy NTkxNDY4