343 Docking Tail Docker with Transformer • ready to work in less than a minute • suitable for continuous operation • incl. adjustable spacer for uniform tail length • Material: metal • includes operating instructions Local animal protection regulations must be observed! Technical data 22745 Voltage 230 V Mains frequency 50 - 60 Hz Power 58 VA Plug type Safety Plug E + F Operating temperature 750 °C Ref. no. € 22745 1 Hot Cutter Engel • for docking piglet tails but also for separating or fusing cords and ropes • heat control thanks to automatic switch-on and switch-off (approx. 12 s operation / approx. 48 s break) • VDE tested Ref. no. Description € 22720 with cutting tip 22710 1 22721 with V blade 22717 1 22700 without cutting tip 1/25 Tail Docker with Holding Device • this device is used for tail-docking of piglets and lambs • the heated blade pinches off the tail, whilst the wound is simultaneously cauterised • special pincher bracket Local animal protection regulations must be observed! Technical data 22715 Voltage 230 V Mains frequency 50 - 60 Hz Power 60 W Plug type Euro Flat Plug Ref. no. € 22715 1/12 Ref. no. Description € 22719 Blade 1/100/800 Ref. no. Description € 22717 V-blade 1/100/800 22741 Holder 1/10 Technical data Voltage 230 V Mains frequency 50 - 60 Hz Power 60 W Plug type Euro Flat Plug Ref. no. Description € 22710 Cutting tip 1/100/800 22717 V-blade 1/100/800 Local animal protection regulations must be observed! 22720 22721
RkJQdWJsaXNoZXIy MTUxMjAyMw==