527 1 2 3 4 5 A B C D E F 1 2 3 4 1 2 3 4 1 2 3 4 3121BP • Carefully selected range of high-quality work gloves and quality gloves. Selected raw materials, a superlative quality of finish and uncompromising practicability are the hallmarks of this range of products. • Strict monitoring of manufacturers and on delivery for quality of workmanship, fit and freedom from harmful substances Areas of use are illustrated by explanatory pictures. Uniform presentation with high-quality self-service hanger. Label available at customer‘s request. PPE categories: CAT I Low risk, no type approval testing required. The glove complies with the general requirements of EC Directive 2016/425 and must satisfy fundamental requirements (EN ISO 21420). CAT II Medium mechanical risk as per EN 388 is required. CAT III Irreversible or fatal risk, type approval testing and quality monitoring are required by a notified body. Standards for personal protective equipment: EN 388:2016+A1:2018 Mechanical hazards EN 511:2006 Cold protection EN ISO 374-5:2016 Microbiological Contamination EN ISO 11393-4:2020 Protective clothing for the use of hand-held chain saws EN ISO 21420:2020 general glove requirements Important: All data, classifications and pictograms are intended merely as recommendations. In all cases, the safety regulations set down by the legislator or its appointed representatives applicable to the workplace in question must be observed. Risk analysis essential! Performance levels: The higher the number, the better the performance level Abrasion resistance level 0 – 4 Cut resistance (Coup test) level 0 – 5 Tear resistance level 0 – 4 Puncture resistance level 0 – 4 Cut resistance (TDM – ISO 13997) Level A – F Impact resistance: Level P if passed EN ISO 3741:2016+A1:2018 Protection against chemical contamination EN 407:2020 Protection against thermal risks (heat and fire) protection for users of plant protection products EN ISO 374-1:2016 +A1:2018 EN 388:2016 +A1:2018 EN ISO 11393-4:2020 EN 407:2020
RkJQdWJsaXNoZXIy MTUxMjAyMw==