314 LED Tubes and Moisture-proof Lights Moisture-proof Diffuser Light for LED Tubes • only suitable for T8 LED tubes • no bridging starter required • protected against powerful water jets and dust-proof (IP65 protection class) • unbreakable housing with a high resistance to ammonia • incl. installation clips made of stainless steel • with D marking according to DIN EN 60598-2-24, therefore suitable for areas at risk of fires due to combustible dusts or fibres (hay storage, feed, litter, etc.) Light source not included! Technical data 34567 345670 Voltage 220 - 240 V AC 220 - 240 V AC Mains frequency 50 - 60 Hz 50 - 60 Hz Max. output of the LED tubes used 24 W 18 W Lamp Base G13 G13 Protection class IP65 IP65 Protection class I I Ref. no. Colour Length € 34567 grey 150 cm 1/9 345670 grey 120 cm 1/12 Moisture-proof diffuser light with LED tubes • 2 LED tubes (each 22 Watt, 150 cm) included in the scope of delivery (TÜV-GS certified) • no bridging starter required • protected against powerful water jets and dust-proof (IP65 protection class) • break-resistant housing made from ABS with PC cover • incl. mounting material and mounting clips made from stainless steel • Through-wiring 3 x 1.5 mm² • bilateral cable conduit M20 • only suitable for T8 LED tubes Technical data Voltage 220 - 240 V Mains frequency 50 - 60 Hz Colour rendering (CRI) Ra > 80 Lamp Base G13 Ref. no. Power Length Width Height Dimming function Colour temperature € 345672 22 W 157 cm 10 cm 5,5 cm cannot be dimmed 6.500 K 1/8 New product LED moisture-proof lamp FarmLINE Perfect for rough conditions in wet, moist or dusty environments! • for lighting stables, riding halls, industrial buildings and warehouses, barns, workshops, etc. • with integrated high-performance LED chips (no fluorescent tubes required) • protected against powerful water jets and dust-proof (IP65 protection class) • with D marking according to DIN EN 60598-2-24, therefore suitable for areas at risk of fires due to combustible dusts or fibres (hay storage, feed, litter, etc.) • stable, shock-resistant housing made from polycarbonate • uniform and glare-free illumination due to a frosted cover • incl. installation clips made of stainless steel • 3-year warranty Ref. no. Power Length Width Height Dimming function Luminous flux Colour temperature € 345580 25 W 120 cm 8 cm 7,2 cm cannot be dimmed 3.300 lm 6.000 K 1/10 100 345581 50 W 150 cm 8 cm 7,2 cm cannot be dimmed 6.600 lm 6.000 K 1/10 100 3-year warranty Technical data Voltage 220 - 240 V AC Mains frequency 50 - 60 Hz Luminous efficacy 120 lm/W Light angle (half intensity angle) 120 ° Chip service life (L70) > 30.000 h Material Polycarbonate Colour rendering (CRI) Ra > 80 Protection class IP65 Protection class I
RkJQdWJsaXNoZXIy MTUxMjAyMw==