33 Gate Insulator The insulator selection depends on which gate system is installed. The individual gate structures are shown in more detail on the following pages. Gate post* • gate post: item no. 441828 – 140 mm x 250 cm • post height above ground: 165 cm • drive-in depth: 85 cm The permanent fence | wooden post and fence rope Item no. 44948 item no. 441299/011 01 | Litzclip® rope connector 6 mm ... ... for connecting 2 rope ends. 02 | Warning sign ... for attachment at regular, clearly visible intervals. 03 | Fence connector cable … for cross-connecting the tape rows every 200-400 m. • 3 a) connector cable from row 1 to 2 • 3 b) connector cable on every additional row 04 | High voltage underground cable ... for underground transmission of the current. AKO tip: ALWAYS affix the conductor material on the fence inner. Item no. 44819 Item no. 44627/011 Item no. 44629/011 Item no. 446513 Item no. 442004/051 03 | a) 03 | b) Ø 140 mm Ø 140 mm galvanised pasture gate 04 | underground cable AKO tip: Set the gate tethering post well in concrete or support the post with a cross plank (see p. 21 and 23) in order to keep the post permanently vertical. Run the underground cable under the soil in a protective hose. This will prevent the cable from being damaged. E-Line 3-6m (item no. 44255/011) E-Line 4.5-9m (item no. 442551/011)
RkJQdWJsaXNoZXIy MTUxMjAyMw==