41 The semi-permanent fence | T-Post and fence tape Installation of a fence starter with T-posts (item no. 441178) • drive the gate or junction post approx. 40-50 cm into the ground... • drive in the next track post using a spacing of 1.50 m... • remove the base plates from the diagonal support post... • install the fence starter set on the gate or junction post and on the track post... • attach the diagonal support post to the sleeve and align it Installation of a corner with T-posts (item no. 441177) • drive the corner post approx. 40-50 cm into the ground... • drive in both additional corner and stretch posts using a spacing of 1.50 m each... • remove the base plates from both diagonal support posts... • install the corner solution set on the corner posts... • attach the diagonal support posts to the sleeve and align them The corner in detail... The fencer starter in detail... The correct installation of corner and starter posts. AKO tip: We recommend using our T-Post corner insulators to avoid the conductor material touching diagonal support posts.