43 The semi-permanent fence | T-Post and fence tape Gate Insulator The insulator selection depends on which gate system is installed. The two gate structures are shown in more detail on the following pages. Gate post* • item no. 441462: 213 cm (6 pcs./gate) Information on installing the diagonal structure on p. 40/41 • post height above ground: approx. 165 cm • drive-in depth: approx. 40-50 cm Important To install a 90° corner, a T-junction or a gate, you need the variable corner set or starter set for T-Posts. • support post crossbeam: 100 mm x 200 cm (item no. 441825) 01 | Ram for T-Posts … for driving in all fence posts. 02 | T-Post puller ...for pulling out the posts. 03 | Litzclip® tape connector 40 mm ...for connecting 2 tape ends. 04 | Warning sign ...for attaching at regular, clearly visible intervals. AKO tip: ALWAYS affix the conductor material on the fence inner. Item no. 446513 442002/051 Item no. 441324 Item no. 441300 item no. 4494440 - 40 mm tape item no. 4494420 - 20 mm tape Underground cable Post spacing: 1.5m Post spacing: 1.5m
RkJQdWJsaXNoZXIy MTUxMjAyMw==