78 Testing the fence device Problem too little power in the fence! Check the voltage at the fence using a fence tester! Check the voltage at the fence using a fence tester! Robust animals: at least 4,000 Volt? Robust animals: at least 4,000 Volt? Switching the device off Switching the device off Disconnect the fence directly at the device, but leave the earth connection untouched • replace the 9 Volt battery • charge the 12 Volt battery • have the 230 Volt supply checked by a specialist Switch the device on Switch the device on Check the output voltage directly on the device using the fence tester! Voltage above 6,000 Volt? Is the power supply to the device OK? Service Reconnect the device with the fence Problem resolved NO NO NO NO YES YES YES The fence device check Checking the fence supply line Sensitive animals: at least 2,500 Volt? Sensitive animals: at least 2,500 Volt? Tip 1 1. Remove the knurled nuts from the earthing and fence output 2. Contact the earth output on the device using the fence tester’s earthing rod 3. Contact the fence output on the device using the fence tester Tip 2 1. 9 volt battery: flashing red => battery is flat 2. 12 volt rechargeable battery: flashing red => battery is flat 3. 230 Volt mains power: LED not flashing => no power supply
RkJQdWJsaXNoZXIy MTUxMjAyMw==