141 Fence Starter Set T-Post The support kit...Installation of a fence starter with T-posts • Drive the gate or junction post approx. 40 - 50 cm into the ground... • Drive in the next track post using a spacing of 1.50 m... • Remove the base plates from the diagonal support post... • Install the fence starter set on the gate or junction post and on the track post... • Attach the diagonal support post to the sleeve and align it. Ref. no. € 441178 1/12 Variable Corner Solution Set T-Post The corner in detail...Installation of a corner with T-posts • Drive the corner post approx. 40 - 50 cm into the ground... • Drive in both additional corner and stretch posts using a spacing of 1.50 m each... • Remove the base plates from both diagonal support posts... • Install the corner solution set on the corner posts... • Attach the diagonal support posts to the sleeve and align them. Ref. no. € 441177 1/6 T-Post and Accessories We recommend using our T-Post corner insulators on the corner post to avoid the conductor touching the diagonal support posts.
RkJQdWJsaXNoZXIy MTUxMjAyMw==