Hobbyfarming 2024

47 Poultry Netting Supplementary Set for Pasture Nets WolfStop The flexible and safe solution against wolves: can be used both as dig-under and jump-over protection, as well as to increase the height of the net, keeping wolves at bay! • 10-piece set for mounting on all commercially net posts • supports can be secured in their holders at 3 defined angles • the net can be rolled up easily and put to one side/stored by locking the support parallel to the post (position 1.B) • the conductor material line (electrified) made possible by the WolfStop keeps the wolf away from the net and therefore away from the animals being protected • if the WolfStop is used mainly as a height extension, then a signal tape (item 27240, optionally available) can be used for scaring purposes • the additional conductor material line must be operated with the same device as the net itself • in the case of horned sheep and goats, a distance strand can be drawn on the inside of the net to the electrified wolf defence fence • mounted on posts in the poultry netting and equipped with an electrified wire, the WolfStop also keeps foxes away from the poultry run (mounting in position 1.A, ideally close to the ground) • can be used for: posts max. 16 mm diameter patented Awarded the silver DLG Innovation Prize in 2022 ​ ​ Set consisting of: 10 x support, 10 x connecting terminal, 10 x screw and nut set (M5) 3 possible applications in one solution: • as dig-under protection = mounting on the post 20 cm above ground at a 90° angle (Item 1.A), retract and electrify the wire - fix at 0° angle (Item 1.B) for mowing, removing, or rolling up the net • as jump-over protection = mounting on the top end of the post at a 45° angle (Pos. 2), retract the wire and electrify it • as height extension = mounting on the top end of the post at a 0° angle (Item 3), retract the electrified wire or signal tape Ref. no. Material € 27256 thermoplastic + fibreglass ​ European patent pending Twist Butler Netting Winder The fantastic all-round helper for the day-to-day handling of pasture nets: it allows easy setup and dismantling of the nets and offers a handy solution for storage! • easy and at the same time practical solution for setting up and dismantling pasture nets • equivalent to a reel system for nets • can be used for all nets up to 125 cm tall incl. ground nails and 50 m length • the removable crank means that the rolled-up nets can be transported and stored standing up in a space-saving and orderly manner on the plates • pasture nets can be handled daily without the use of force or outside help thanks to the Twist Butler ​ ​ ​ Ref. no. Description € 27940 1 base element (plate and rod) with one crank ​ 27942 2 Base Elements (Plate and Rod) ​ Ref. no. Description € 27941 single crank ​ Made in Germany

RkJQdWJsaXNoZXIy MTUxMjAyMw==