Hobbyfarming SmartCoop

6 Drinker heating Feed dispenser Coop ventilation and extraction The Feed Dispenser (item 70662) is an accessory for the SmartCoop Feeder (70660) for controlling the time and amount of feed provided, and for level control. The integrated sensor detects a filling level which is too low, and sends a signal to the controller. The Drinker Heating (item 70652) is an accessory for the SmartCoop Poultry Drinker (item 70651) for level control, and also prevents the drinking water from freezing. The fill level sensor detects a water level which is too low, and sends a signal to the controller. The integrated temperature sensor and the heating element of the drinker heating monitor the water temperature and prevent the drinking water from freezing. The Coop Ventilation (item 70626) ensures a sure supply of fresh air and a healthy coop climate. Switch-on duration, intervals and fan power can be set individually. In combination with the SmartCoop Air Temperature Sensor (item 70624), temperature-dependent switching on/off is possible. For an optimum coop climate we recommend combined use with the Coop Air Extraction (item 70625). It removes moisture and air contaminated with ammonia, and provides effective protection against moisture damage and mould infestation. The switchable intermediate socket (Art. 70628) controls the power supply to electronic devices (e.g. additional light sources, heating plates, heat lamps, etc.) according to individual time or temperature settings. It is connected to an existing 230 V socket and the device to be controlled is plugged in. The power flow is interrupted according to the selected settings and the connected appliance is utilised intelligently and in an energy-saving manner. Switchable intermediate socket

RkJQdWJsaXNoZXIy MTUxMjAyMw==