6 Drinker heating Feed dispenser Air Temperature Sensor Coop ventilation and extraction The Air Temperature Sensor (item 70624) monitors the temperature in the coop and enables temperature-dependent control of the coop ventilation. The Feed Dispenser (item 70662) is an accessory for the SmartCoop Feeder (70660) for controlling the time and amount of feed provided, and for level control. The integrated sensor detects a filling level which is too low, and sends a signal to the controller. The Drinker Heating (item 70652) is an accessory for the SmartCoop Poultry Drinker (item 70651) for level control, and also prevents the drinking water from freezing. The fill level sensor detects a water level which is too low, and sends a signal to the controller. The integrated temperature sensor and the heating element of the drinker heating monitor the water temperature and prevent the drinking water from freezing. The Coop Ventilation (item 70626) ensures a sure supply of fresh air and a healthy coop climate. Switch-on duration, intervals and fan power can be set individually. In combination with the SmartCoop Air Temperature Sensor (item 70624), temperature-dependent switching on/off is possible. For an optimum coop climate we recommend combined use with the Coop Air Extraction (item 70625). It removes moisture and air contaminated with ammonia, and provides effective protection against moisture damage and mould infestation.
RkJQdWJsaXNoZXIy MTUxMjAyMw==