63 *£ ex VAT GRIPPLE SPARE CAM SET FOR TORQUE TENSIONING TOOL Replace Gripple Torque Tool Cam headsets with this simple and easy to install Cam Kit. Torque Tool Cam Kit includes: • 1x Spring Clip • 1x Spring • 1x Cam Ref. no. £* 488169 1 GRIPPLE SPARE CAM SET FOR CONTRACTOR TOOL Gripple Contractor Tool Cam Replacement Set for all metal contractor tool. Each Contractor Tool Replacement Cam Kit includes: • 1x Cam • 1x Cam Shaft • 1x Cam Spring • 1x Spring Clip Ref. no. £* 488170 1 GRIPPLE TWISTERS The Twister secures the tail wire. Making the installation completely safe and hazard free, it gives a tidy and neat finish. Use on mild steel or high tensile wire from 1mm to 3mm. Ref. no. MOQ Pieces / unit £* 488186 1 pouch 100 / pouch 1 COLLET CHUCK WITH VOLTMETER The new and improved Gripple collet chuck not only tensions the wire but also regulates the applied load for consistently reproducible results and thus the maximum wire life. • The Gripple collet chuck enables wire tensioning up to 400 kg thanks to the 6:1 conversion of the tensioning mechanism • Suitable for fence wires, trellis wires and anchor ropes up to 6 mm in diameter • Measurement range: 100 - 300 kg • Ease of use and low weight make working easy even with multiple use Permanent Fencing Accessories GRIPPLE RELEASE KEY The Setting Key allows Gripple tensioners to be repositioned on the wire before tension is applied. To use, simply insert the key into the small hole adjacent to the main channel, releasing the roller and allowing the Gripple to move freely Ref. no. £* 488171 1 Ref. no. £* 488808 1 G
RkJQdWJsaXNoZXIy MTUxMjAyMw==