26 Straight sections Insulator The plastic track insulators are fixed using 2 wood screws and have different functions. Insulator item no. 441290 is used for rough terrain. Its clamping function means it tensions and holds the tape, preventing it from bending. Insulator item no. 44340 is used on straight stretches. It only guides the tape and keeps it on track. Track post* • item no. 441826: 100 mm x 225 cm • post height above ground: 165 cm • drive-in depth: 60 cm AKO tip: We recommend shortening the post spacing in windy areas. This means the tape is held firm or guided by the insulators more often, reducing exposure to the wind. Corner Insulator The Profi corner and strain insulator (item no. 44350) is installed both in corners and at fence starts and ends in order to tension and hold the tape. It is also fixed directly on the wooden post using 2 wood screws. Unlike the Profi insulator, the Cavallo corner insulator (item no. 441376) is screwed directly into the post without wood screws. This insulator flexibly guides the tape through the corner. Corner and support post* • corner post: item no. 441828 – 140 mm x 250 cm • post height above ground: 165 cm • drive-in depth: 85 cm T-junction Insulator This insulator is the same as item no. 44350, just with a metal plate. Using this plate, you can either hang gate handles or construct pasture junctions. Tension post* • tension post: item no. 441828 – 140 mm x 250 cm • post height above ground: 165 cm • drive-in depth: 85 cm Item no. 441290 Item no. 44340 Item no. 443501 Item no. 441376 The permanent fence | wooden post and fence tape item no. 44355/041 02 | warning sign Ø 140 mm Ø 140 mm Ø 100 mm 50 cm 50 cm Post spacing: 3-4 m 01 | Litzclip Tape Connector
RkJQdWJsaXNoZXIy MTUxMjAyMw==